Drivers - unrecognised

There are 3 replies, with the last one on September 24 2013 at 13:14:33 by john.p
Quote:
Hi,

If you are creating a PE 4 CD, then all usb3 devices are supported using the generic xhci driver. For simplicity, we suggest you create a PE 4 CD.

If you choose to continue with the PE 3 build, the following drivers should work with Renesas/NEC xhci devices.

https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19880/eng/USB3.0_allOS_2.1.28.1_PV.exe&lang=eng&Dwnldid=19880


Kind Regards
John - Macrium Support